Orra Audio Orra Tone Zone 1.1.31

QUICK INFO: File size: 4.7 MB

DESCRIPTION: Tonal Curve Corrector. Analyze, correct, and sculpt your tonal curve in one plugin. See where your mix sits against professional targets and fine-tune with a full parametric EQ and per-band saturation.

  • 40-band spectral analysis with smooth tonal curve display
  • 24 genre target curves calibrated from professional masters
  • Reference track learning from any audio file
  • FFT-based auto-corrective EQ with level-aware processing
  • 6-band parametric EQ overlay with draggable nodes
  • Per-band analog saturation: Tube, VCA, British
  • A/B/C/D comparison – four slots for fast settings auditioning
  • Auto Correction Toggle – Disable tonal correction while maintaining consistent latency for reliable PDC on any track
  • Internal Bypass (BYP) – clean crossfade bypass with analysis always live
  • Fine Control – Shift+scroll for precise Q, Shift+drag for fine frequency/gain

Keep your tonal curve in the zone
Not just a meter.
Most tonal analysis tools stop at showing you the problem. Tone Zone goes further – it analyzes, corrects, and lets you fine-tune by hand, all in the same window without switching plugins.

Traditional Approach
Open a metering plugin to see your tonal curve. Spot the issues. Switch to a separate EQ to make corrections. Flip back to the meter to check your work. Repeat until it looks right – or until you run out of patience.
See the problem in one plugin, fix it in another.

The Orra Way
See your tonal curve against a genre target. Turn up the correction knob and the FFT-based EQ nudges your spectrum toward the target automatically. Then fine-tune with a 6-band parametric EQ and add per-band saturation – all in the same window, all updating in real time.
Analyze, correct, and sculpt without ever switching plugins.

Whats New
Updates: official site does not provide any info about changes in this version

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

Orra Audio Orra Tone Zone 1.1.31 (5 MB)

RapidGator
Code:Copy to clipboard

https://rapidgator.net/file/dccae9952e933297327cca16ff20ea64/Orra.Audio.Orra.Tone.Zone.1.1.31.rar

Freedl.ink
Code:Copy to clipboard

https://frdl.io/47ulceqiuxx3/Orra.Audio.Orra.Tone.Zone.1.1.31.rar

Orra Audio Orra EQ V1.1.0

QUICK INFO: File Size: 6.1 MB

DESCRIPTION: Orra EQ | Your New Secret Sauce
Streamline your workflow by combining processing you would normally need a plugin chain for, into one tool.

  • 16 parametric bands processing in series
  • Five modes per band: EQ, Orra Tube, Tape, Models, Dynamic EQ
  • Per-band Mid/Side processing for independent center and side control
  • 17 saturation options: Orra Tube + 6 tape models + 10 saturate algorithms
  • Dynamic saturation for intelligent harmonic enhancement
  • Create EQ or Orra Tube saturation bands with a double left or right-click on the curve
  • Surgical precision with Q range 0.1 to 40
  • Real-time spectrum analyzer with pre/post monitoring

Why Orra EQ exists
We didn’t set out to build another EQ. We wanted per-frequency control over our entire tone-shaping chain-EQ, saturation, and dynamics woven together however we needed, not locked into separate plugins.

Traditional Approach
Load an EQ to shape tone. Load a saturator for color. Load a compressor for dynamics. Each plugin processes your entire signal before passing it to the next-you can’t EQ just the highs, saturate just the mids, then compress just the lows in one fluid chain.
Full-signal processing, one stage at a time.

The Orra Way
Sixteen bands, each with its own mode. EQ one frequency, saturate another, compress a third-all in whatever order you want. Stack a tube saturator after a dynamic cut on the same band, or alternate between processing styles across the spectrum.
Per-frequency control over your entire tone-shaping chain.

What’s New
official site does not provide any info about changes in this version.

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

Orra Audio Orra EQ V1.1.0 (7 MB)

RapidGator
Code:Copy to clipboard

https://rapidgator.net/file/5bcfd47d0183d26638109f1f3998b555/Orra.Audio.Orra.EQ.V1.1.0.rar

Freedl.ink
Code:Copy to clipboard

https://frdl.io/ay9viat0bhjw/Orra.Audio.Orra.EQ.V1.1.0.rar

Orra Audio Orra EQ 1.1.1

QUICK INFO: File size: 6.5 MB

DESCRIPTION: Your New Secret Sauce.

Streamline your workflow by combining processing you would normally need a plugin chain for, into one tool.

β€’ 16 parametric bands processing in series
β€’ Five modes per band: EQ, Orra Tube, Tape, Models, Dynamic EQ
β€’ 17 saturation options: Orra Tube + 6 tape models + 10 saturate algorithms
β€’ Dynamic saturation for intelligent harmonic enhancement
β€’ Create EQ or Orra Tube saturation bands with a double left or right-click on the curve
β€’ Surgical precision with Q range 0.1 to 40
β€’ Real-time spectrum analyzer with pre/post monitoring

Why Orra EQ exists
We didn’t set out to build another EQ. We wanted per-frequency control over our entire tone-shaping chain-EQ, saturation, and dynamics woven together however we needed, not locked into separate plugins.

Traditional Approach
Load an EQ to shape tone. Load a saturator for color. Load a compressor for dynamics. Each plugin processes your entire signal before passing it to the next-you can’t EQ just the highs, saturate just the mids, then compress just the lows in one fluid chain.

Full-signal processing, one stage at a time.

The Orra Way
Sixteen bands, each with its own mode. EQ one frequency, saturate another, compress a third-all in whatever order you want. Stack a tube saturator after a dynamic cut on the same band, or alternate between processing styles across the spectrum.

Per-frequency control over your entire tone-shaping chain.

17 Saturation Types – All Dynamic-Ready
Choose from Orra Tube, 6 tape machines, and 10 creative saturators-from vintage preamp warmth to aggressive wavefolder destruction.

Every saturation type can be made dynamic. Instead of just adding harmonics, dynamic saturation brings up quiet details through harmonic enrichment-like upward compression, but with color and character instead of just gain.

The result: presence and richness that responds to your playing, not just a static effect slapped on top.

Saturation that breathes with your music

Snap to Note & Key
Stop guessing frequencies. Enable snap-to-note and your bands lock to musical pitches-C2, F#4, whatever note you need.

Right-click any band and choose the exact note you want it locked to-C2, F#4, A1, whatever your song needs. No more hunting for frequencies with a calculator.

Perfect for surgical work on bass notes, taming resonant frequencies in vocals, or making sure your boosts align with the actual music.

EQ musically, not just technically

A Complete EQ – Plus Everything Else
Before you even touch saturation, Orra EQ is a fully-featured parametric equalizer: 16 bands, Q from 0.1 to 40, filter slopes up to 48dB/octave, and frequency range from 10Hz to 22kHz.

High-pass, low-pass, shelves, bells, notches-all the surgical tools you expect, with a real-time spectrum analyzer showing pre or post processing.

Use it as a clean, transparent EQ when that’s what you need. Then flip a band into saturation or dynamic mode when you want more. One plugin, zero compromises.

Pro-grade EQ that grows with your needs

EQ Mode
Surgical parametric EQ with Q from 0.1 to 40. Slopes up to 48dB/octave for brick-wall filtering.

Perfect for corrective work and precise tonal shaping

Orra Tube
Our signature tube saturation. Even-order harmonics add warmth without muddiness.

When you need air, body, and vintage character

Tape Models
Six authentic tape machines from mastering-grade to lo-fi. Three speed modes: High, Medium, Low and noise reduction.

Analog glue and cohesion across the frequency spectrum

Saturate
Ten algorithms: Vintage Preamp, British Console, Transistor, Wavefolder, and more.

Creative color ranging from subtle to extreme

Dynamic Mode
Frequency-dependent compression with full envelope controls. Threshold, ratio, attack, release.

Control resonances and tame problem frequencies

Dynamic Saturation
Upward compression through harmonics. Brings up quiet details without raising the noise floor.

Add presence and richness without just turning things up

Whats New
Updates: official site does not provide any info about changes in this version

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

Orra Audio Orra EQ 1.1.1 (7 MB)

RapidGator
Code:Copy to clipboard

https://rapidgator.net/file/eee82092dce10f3f8fd60cd1b69846fb/Orra.Audio.Orra.EQ.1.1.1.rar

Freedl.ink
Code:Copy to clipboard

https://frdl.io/q8xlydsch2jb/Orra.Audio.Orra.EQ.1.1.1.rar

Orra Audio Orra EQ 1.0.1 – (6 MB)

Orra Audio Orra EQ 1.0.1​
File size: 5.2 MB​

Your New Secret Sauce

Streamline your workflow by combining processing you would normally need a plugin chain for, into one tool.

β€’ 16 parametric bands processing in series
β€’ Five modes per band: EQ, Orra Tube, Tape, Models, Dynamic EQ
β€’ 17 saturation options: Orra Tube + 6 tape models + 10 saturate algorithms
β€’ Dynamic saturation for intelligent harmonic enhancement
β€’ Create EQ or Orra Tube saturation bands with a double left or right-click on the curve
β€’ Surgical precision with Q range 0.1 to 40
β€’ Real-time spectrum analyzer with pre/post monitoring

Why Orra EQ exists
We didn’t set out to build another EQ. We wanted per-frequency control over our entire tone-shaping chain-EQ, saturation, and dynamics woven together however we needed, not locked into separate plugins.

Traditional Approach
Load an EQ to shape tone. Load a saturator for color. Load a compressor for dynamics. Each plugin processes your entire signal before passing it to the next-you can’t EQ just the highs, saturate just the mids, then compress just the lows in one fluid chain.

Full-signal processing, one stage at a time.

The Orra Way
Sixteen bands, each with its own mode. EQ one frequency, saturate another, compress a third-all in whatever order you want. Stack a tube saturator after a dynamic cut on the same band, or alternate between processing styles across the spectrum.

Per-frequency control over your entire tone-shaping chain.

17 Saturation Types – All Dynamic-Ready
Choose from Orra Tube, 6 tape machines, and 10 creative saturators-from vintage preamp warmth to aggressive wavefolder destruction.

Every saturation type can be made dynamic. Instead of just adding harmonics, dynamic saturation brings up quiet details through harmonic enrichment-like upward compression, but with color and character instead of just gain.

The result: presence and richness that responds to your playing, not just a static effect slapped on top.

Saturation that breathes with your music

Snap to Note & Key
Stop guessing frequencies. Enable snap-to-note and your bands lock to musical pitches-C2, F#4, whatever note you need.

Right-click any band and choose the exact note you want it locked to-C2, F#4, A1, whatever your song needs. No more hunting for frequencies with a calculator.

Perfect for surgical work on bass notes, taming resonant frequencies in vocals, or making sure your boosts align with the actual music.

EQ musically, not just technically

A Complete EQ – Plus Everything Else
Before you even touch saturation, Orra EQ is a fully-featured parametric equalizer: 16 bands, Q from 0.1 to 40, filter slopes up to 48dB/octave, and frequency range from 10Hz to 22kHz.

High-pass, low-pass, shelves, bells, notches-all the surgical tools you expect, with a real-time spectrum analyzer showing pre or post processing.

Use it as a clean, transparent EQ when that’s what you need. Then flip a band into saturation or dynamic mode when you want more. One plugin, zero compromises.

Pro-grade EQ that grows with your needs

EQ Mode
Surgical parametric EQ with Q from 0.1 to 40. Slopes up to 48dB/octave for brick-wall filtering.

Perfect for corrective work and precise tonal shaping

Orra Tube
Our signature tube saturation. Even-order harmonics add warmth without muddiness.

When you need air, body, and vintage character

Tape Models
Six authentic tape machines from mastering-grade to lo-fi. Three speed modes: High, Medium, Low and noise reduction.

Analog glue and cohesion across the frequency spectrum

Saturate
Ten algorithms: Vintage Preamp, British Console, Transistor, Wavefolder, and more.

Creative color ranging from subtle to extreme

Dynamic Mode
Frequency-dependent compression with full envelope controls. Threshold, ratio, attack, release.

Control resonances and tame problem frequencies

Dynamic Saturation
Upward compression through harmonics. Brings up quiet details without raising the noise floor.

Add presence and richness without just turning things up

Whats New
Updates: official site does not provide any info about changes in this version

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Orra Audio Orra EQ 1.0.1 – (6 MB)

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/d60b4001fcd89f5b82f770ead551a0c8/Orra.Audio.Orra.EQ.1.0.1.rar

Freedl.ink Link(s)
Code:Copy to clipboard

https://frdl.io/7id3t3h4m6sd/Orra.Audio.Orra.EQ.1.0.1.rar

Orange Tree Samples – Evolution Strawberry 1.3.0 Full + Update (Kontakt)

Format : kontakt
Other Orange Tree Samples libraries for Kontakt
About the update
The distribution contains two folders in the root directory:
Evolution Strawberry 1.3.0 [Orange Tree Samples] – full-size library
Evolution Strawberry 1.3.0 Update [Orange Tree Samples] – update for owners
To download the desired material, you need to mark it with a flag when launching the torrent file.
To install the update, you need to copy and replace the contents of the Evolution Strawberry 1.3.0 Update [Orange Tree Samples]

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Orange Tree Samples – Evolution Strawberry 1.3.0 Full + Update (Kontakt)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/7970245f82e9855fbaf848bdb3f2f65f/Evolution.Strawberry.1.3.0.Orange.Tree.Samples.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/tzkp5dkqigzt

Orange Tree Samples – Evolution Modern Nylon 1.3.0 Full + Update (Kontakt)

Format : Kontakt

Description: Guitar
About the update
The distribution contains two folders in the root directory:
Evolution Modern Nylon 1.3.0 [Orange Tree Samples] – full-size library
Evolution Modern Nylon 1.3.0 Update [Orange Tree Samples] – update for owners
To download the desired material, you need to mark it with a flag when launching the torrent file.
To install the update, you need to copy and replace the contents of the Evolution Modern Nylon 1.3.0 Update [Orange Tree Samples]

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Orange Tree Samples – Evolution Modern Nylon 1.3.0 Full + Update (Kontakt)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/ea5a0bcb50ef0ea8b0d2906637a235f8/Evolution.Modern.Nylon.1.3.0.Orange.Tree.Samples.part1.rar
https://rapidgator.net/file/97543d1f355cdf9b703c0723571804db/Evolution.Modern.Nylon.1.3.0.Orange.Tree.Samples.part2.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/mvag4ntrqioz
https://clicknupload.click/y73fso2l1qa4

Oracle Database APEX v24.2.8

Year/Release Date : 2025
Developer : Oracle Corporation
Bit depth : 32bit, 64bit
Interface language : Multilingual
Tablet : not required

System requirements: 2 GB RAM recommended

Description:
Oracle APEX Release 24.2
Patch 37366599: PSE BUNDLE FOR APEX 24.2 (PSES ON TOP OF 24.2.0)

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Oracle Database APEX v24.2.8 (291 MB)
ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/ndafhny0wzsr

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/153b8bf5eae5d1232f3d493a077546d6/Oracle.Database.APEX.24.2.rar

Oracle Database 19c Important Recommended One-off Patches (DOC ID 555.1) for Linux 19.26.0.0.250121

Year/date of release : 2025
Version : 19.25.0.0.250218
Developer : Oracle Corporation
Developer website : Support.oracle.com
Disgusting : 64BIT
Interface language : multi -language (Ru is present)
Tablet : not required
Advertising : absent
System requirements:
Minimum RAM: At least 1 GB RAM for Oracle Database installations. 2 GB RAM recommended.
At least 8 GB RAM for Oracle Grid Infrastructure installations.
ОписаниС: Below is the list of important patches to consider applying on top of 19.26. In addition to the relevant patches listed below, you should also review patches in Database PSU/BP/Update/Revision – Known Issues Primary Note(Doc ID 1227443.1) and Oracle Database Patches to Consider for 19c (Doc ID 2781612.2) which contains patches to consider for specific areas such as Data Pump, Golden gate etc.
Recommended Patches for 19.26 DB Home
37546436: Gi mrp 19.26.0.0.250218
34672698: [VOS] DB50: ORA-800: soft external error, arguments: [set priority failed], [vktm] , dism(16)
29213893: DBMS_STATS Failing With Error Ora-1422 When Gathering Stats for User$ Table
37470729: DATAPUMP BUNDLE PATCH 19.26.0.0.0
6880880: OPatch 12.2.0.1.45

Recommended Patches for 19.26 GI Home
37546436: Gi mrp 19.26.0.0.250218
34672698: [VOS] DB50: ORA-800: soft external error, arguments: [set priority failed], [vktm] , dism(16)
6880880: OPatch 12.2.0.1.45

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Oracle Database 19c Important Recommended One-off Patches (DOC ID 555.1) for Linux 19.26.0.0.250121 (135.31 MB)

Drop Link(s)
Code:Copy to clipboard

https://drop.download/xuxnuvnqrb7e/Recommended.Patches.for.Oracle.Database.19.26.on.Linux.x86-64.rar

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/c56ff9f0b3bfd15973c3f536fd5cdf04/Recommended.Patches.for.Oracle.Database.19.26.on.Linux.x86-64.rar

Opencartis Spatial Manager For AutoCAD Professional 9.4.1.16676

File size: 323.2 MB​

Spatial Managerβ„’ for AutoCAD is a powerful AutoCAD plug-in designed for AutoCAD users who need to import, export, transform and manage spatial data in a simple, fast and inexpensive way, which includes many functionalities not seen so far in AutoCAD.

It comes in a lightweight application that runs inside AutoCAD and allows the user to import and export geospatial data between AutoCAD drawings and geospatial files, data servers or data stores, display background maps, manage alphanumeric data and data tables, create terrain models and contours, search for locations, transform coordinate systems, and many more geospatial functionalities.

Key Features
Import spatial data into AutoCAD
Imports spatial data, into new or existing AutoCAD drawings, as AutoCAD objects and Extended Entity Data (EED/XDATA)
Export spatial data from AutoCAD
Export objects from the drawing to spatial files or databases, and saves their Extended Entity Data (EED/XDATA) as alphanumeric data tables
Coordinates transformation Updated V9
Calculate geometric transformations of the objects in the import and export processes
Background maps Updated V9
Choose from among a lot of dynamic Backgrounds Maps from providers such as Google Maps, OpenStreetMap, Bing, MapBox, Ordnance Survey, etc., configure your own maps from TMS, WMS or WMTS servers or connect to Cloud Optimized GeoTIFF (COG) type sources
Publishing to Google Earth
Export all or part of the objects in the visible Layers of the drawing and their data to a KML or KMZ file
Thematic maps
Visualize objects coloring them depending on their field values

Whats New
Updates: official site does not provide any info about changes in this version

Windows 8.1, Windows 10, Windows 8, Windows 7

Code:Copy to clipboard

https://www.spatialmanager.com/spm-forautocad/overview/

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Opencartis Spatial Manager For AutoCAD Professional 9.4.1.16676 (323.22 MB)

Drop Link(s)
Code:Copy to clipboard

https://drop.download/wcrlia4ly9hx/Opencartis.Spatial.Manager.For.AutoCAD.Professional.9.4.1.16676.rar

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/182f7c39a62c9b98a87aca33356e17a8/Opencartis.Spatial.Manager.For.AutoCAD.Professional.9.4.1.16676.rar

Opencartis Spatial Manager For AutoCAD Professional 9.3.1.16597

File size: 318.8 MB​

Spatial Managerβ„’ for AutoCAD is a powerful AutoCAD plug-in designed for AutoCAD users who need to import, export, transform and manage spatial data in a simple, fast and inexpensive way, which includes many functionalities not seen so far in AutoCAD.

It comes in a lightweight application that runs inside AutoCAD and allows the user to import and export geospatial data between AutoCAD drawings and geospatial files, data servers or data stores, display background maps, manage alphanumeric data and data tables, create terrain models and contours, search for locations, transform coordinate systems, and many more geospatial functionalities.

Key Features
Import spatial data into AutoCAD
Imports spatial data, into new or existing AutoCAD drawings, as AutoCAD objects and Extended Entity Data (EED/XDATA)
Export spatial data from AutoCAD
Export objects from the drawing to spatial files or databases, and saves their Extended Entity Data (EED/XDATA) as alphanumeric data tables
Coordinates transformation Updated V9
Calculate geometric transformations of the objects in the import and export processes
Background maps Updated V9
Choose from among a lot of dynamic Backgrounds Maps from providers such as Google Maps, OpenStreetMap, Bing, MapBox, Ordnance Survey, etc., configure your own maps from TMS, WMS or WMTS servers or connect to Cloud Optimized GeoTIFF (COG) type sources
Publishing to Google Earth
Export all or part of the objects in the visible Layers of the drawing and their data to a KML or KMZ file
Thematic maps
Visualize objects coloring them depending on their field values

Whats New
Updates: official site does not provide any info about changes in this version

Windows 7, Windows 8, Windows 8.1, Windows 10

Code:Copy to clipboard

https://www.spatialmanager.com/spm-forautocad/overview/

β‹†πŸ•·- – – – -β˜½β”€β”€β”€β›§ β€β–β€ž β›§β”€β”€β”€β˜Ύ – – – -πŸ•·β‹†β€‹

️ Opencartis Spatial Manager For AutoCAD Professional 9.3.1.16597 (323.15 MB)

Drop Link(s)
Code:Copy to clipboard

https://drop.download/qfry0xti44l9/Opencartis.Spatial.Manager.For.AutoCAD.Professional.9.3.1.16597.rar

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/f6ca03d53fee8caf45dec8ffce4f4f68/Opencartis.Spatial.Manager.For.AutoCAD.Professional.9.3.1.16597.rar