NulledCodeSolutions.online

Overview of R-Studio Network
This program is a family of powerful undelete and data recovery software for experienced data recovery professionals. The new unique data recovery technologies empower it.
It is the most comprehensive data recovery solution for recovery files from NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), Little, and Big Endian variants of UFS1/UFS2.
Moreover, It also uses raw file recovery (scan for known file types) for heavily damaged or unknown file systems. It functions on local and network disks, even if such partitions are formatted, damaged, or deleted. Flexible parameter settings give you absolute control over data recovery.

Features of R-Studio Network

✔A powerful data recovery software
✔Comprehensive data recovery solution
✔Recover files from a wide range of file systems
✔Recover RAW files using RAW file recovery
✔Works on both local and network disks

Technical Details and System Requirements

✔Supported OS: Windows 11, Windows 10, Windows 8.1, Windows 7
✔RAM (Memory): 2 GB RAM (4 GB recommended)
✔Free Hard Disk Space: 200 MB or more

️ R-Studio Network 9.5 Build 191520 RePack (& Portable) by KpoJIuK (39.91 MB)

UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/d9n5fv1n8lgq.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/4929d3bf8e09437bbd29080f8781e855/R-Studio.Network.9.5.Build.191520.RePack..Portable.by.KpoJIuK.rar

Overview of R-Studio Network
This program is a family of powerful undelete and data recovery software for experienced data recovery professionals. The new unique data recovery technologies empower it.
It is the most comprehensive data recovery solution for recovery files from NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), Little, and Big Endian variants of UFS1/UFS2.
Moreover, It also uses raw file recovery (scan for known file types) for heavily damaged or unknown file systems. It functions on local and network disks, even if such partitions are formatted, damaged, or deleted. Flexible parameter settings give you absolute control over data recovery.

Features of R-Studio Network

✔A powerful data recovery software
✔Comprehensive data recovery solution
✔Recover files from a wide range of file systems
✔Recover RAW files using RAW file recovery
✔Works on both local and network disks

Technical Details and System Requirements

✔Supported OS: Windows 11, Windows 10, Windows 8.1, Windows 7
✔RAM (Memory): 2 GB RAM (4 GB recommended)
✔Free Hard Disk Space: 200 MB or more

️ R-Studio Network 9.5 Build 191514 RePack (& Portable) by KpoJIuK (39.9 MB)

UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/4iqxk60l315r.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/3a0a4763380315221ae1947fe1bb4794/R-Studio.Network.9.5.Build.191514.RePack..Portable.by.KpoJIuK.rar

Empowered by the new unique data recovery technologies, R-STUDIO is the most comprehensive data recovery solution for recovery files from NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2/Ext3/Ext4 FS (Linux) partitions. It also uses raw file recovery (scan for known file types) for heavily damaged or unknown file systems. It functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.

In addition to being a full-featured data recovery utility, R-Studio also includes:
An advanced RAID reconstruction module
A feature-rich text/hexadecimal editor
An entire advanced disk copying/imaging module in one single piece of software, which makes R-Studio your ideal complete solution for creating a data recovery workstation.

R-Studio utilities recover files:
Deleted without Recycle Bin, or when Recycle Bin has been emptied;
Removed by virus attack or power failure;
After the partition with the files was reformatted, even for different file system;
When the partition structure on a hard disk was changed or damaged. In this case, R-Studio utilities can scan the hard disk trying to find previously existing partitions and recover files from found partitions.
From hard disk with bad sectors. R-Studio Data Recovery Software can first copy the entire disk or its part into an image file and then process the image file. This is especially useful when new bad sectors are constantly appearing on the hard disk and remaining information must be immediately saved.

Features
Standard Windows Explorer – style interface.
Data recovery over the Network. Files can be recovered on network computers running Win2000/XP/2003/Vista/2008/Windows 7/8/8.1/10/Windows Server 2012/2016.
Supported file systems: FAT12, FAT16, FAT32, exFAT, NTFS, NTFS5, ReFS / ReFS2+ (Resilient File System, Windows 2012/2016 Server), HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2/Ext3/Ext4 FS (Linux).
Scan for Known File Types (raw file recovery): if the disk file system is heavily damaged or unsupported, R-Studio searches for specific data patterns ("file signatures") typical for certain file types (Microsoft Office documents, jpgs, etc.). Such known file types can be custom-defined.
Recognition and parsing of Basic(MBR), GPT, and BSD (UNIX) partitions layout schema, and the Apple partition map. Support for Dynamic volumes (Windows 2000-2016/8.1/10) over MBR and GPT.
Support for

• Windows Storage Spaces (created by Windows 8/8.1 and 10/Threshold 2/Anniversary update);
• Apple software RAIDs, CoreStorage, File Vault, and Fusion Drive;
• Linux Logical Volume Manager (LVM/LVM2) and mdadm RAIDs.

R-Studio can automatically recognize and assemble the components of these disk managers even if their databases are slightly damaged. Their components with severe corrupted databases can be added manually.
Damaged RAID recovery. If the OS cannot recognize your RAID, you can create a virtual RAID from its components. Such virtual RAID can be processed like a real one. Standard RAID levels supported: 0, 1, 4, 5, 6. Nested and non-standard RAID level supported: 10(1+0), 1E, 5E, 5EE, 6E. Support for parity delays in all applicable levels. Support for customer-specified RAID layouts.
Automatic RAID parameter recognition.R-Studio can recognize all RAID parameters for RAID 5 and 6. This feature helps the user to solve one of the most difficult problems in RAID recovery.
Creates IMAGE FILES for an entire Hard Disk, Partition or its part. Such image files can be compressed and split into several files to put it on CD/DVD/flash or FAT16/FAT32/exFAT. Then the image files can be processed like regular disks.
Data recovery on damaged or deleted partitions, encrypted files (NTFS 5), alternative data streams (NTFS, NTFS 5), from NTFS with data deduplication.
Recovering data if:
FDISK or other disk utilities have been run;
VIRUS has invaded; FAT is damaged; MBR is destroyed.
Recognizes localized names.
Recovered files can be saved on any (including network) disks accessible by the host operating system. Recovered files may be saved on a disk on a connected remote computer rather than be transferred over network to the local one.
File preview to estimate recovery chances. Most of the file types can be previewed even when their applications are not installed.
File or disk content can be viewed and edited with the advanced hexadecimal editor. The editor supports NTFS file attribute editing.
S.M.A.R.T. attribute monitoring. R-Studio can display S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) attributes for hard drives to show their hardware health and predict their possible failures. Any unnecessary work with such hard drives should be avoided if S.M.A.R.T. warnings appear.
Integration with DeepSpar Disk Imager, a professional HDD imaging device specifically built for data recovery from hard drives with hardware issues. Such integration provides R-Studio with a low-level fine-tuned access to drives with a certain level of hardware malfunction. Moreover, it allows disk imaging and analyzing be performed simultaneously. That is, any sector R-Studio accesses on the source disk will be immediately cloned to a clone disk and any other data recovery operation will be made from that clone disk avoiding further deterioration of the source disk and great reduction in processing time.

Operating System: Windows 2000, XP, 2003 Server, Vista, 2008 Server, Windows 7, Windows 8/8.1/10, Windows Server 2012/2016

Home Page – Code:Copy to clipboard

http://www.r-studio.com/

Language:Multilingual

Code:Copy to clipboard

http://www.r-studio.com/

️ R-Studio Network 9.4 Build 191460 Portable (98.68 MB)

UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/psvjswt1dmgu.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/4857fa92b249461feaaff4667a0b8f5f/R-Studio.Network.9.4.Build.191460.Portable.zip

R-Studio is a family of powerful and cost-effective undelete and data recovery software for experienced data recovery professionals. Empowered by the new unique data recovery technologies, R-STUDIO is the most comprehensive data recovery solution for recovery files from NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2/Ext3/Ext4 FS (Linux) partitions.

R-Studio also uses raw file recovery (scan for known file types) for heavily damaged or unknown file systems. It functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.
R-Studio functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.
The R-Studio data recovery software was originally developed for use by data recovery experts, system administrators, IT professionals, and advanced and experienced computer users. Some of R-Studio’s features were even designed exclusively for computer forensic experts, and most R-Studio users don’t need every single feature of the software.

In addition to being a full-featured data recovery utility, R-Studio also includes
An advanced RAID reconstruction module
A feature-rich text/hexadecimal editor
An entire advanced disk copying/imaging module in one single piece of software, which makes R-Studio your ideal complete solution for creating a data recovery workstation.

R-Studio utilities recover files
Deleted without Recycle Bin, or when Recycle Bin has been emptied;
Removed by virus attack or power failure;
After the partition with the files was reformatted, even for different file system;
When the partition structure on a hard disk was changed or damaged. In this case, R-Studio utilities can scan the hard disk trying to find previously existed partitions and recover files from found partitions.
From hard disk with bad sectors. R-Studio Data Recovery Software can first copy the entire disk or its part into an image file and then process such image file. This is especially useful when new bad sectors are constantly appearing on the hard disk, and remaining information must be immediately saved.

Code:Copy to clipboard

https://forum.r-tt.com/viewtopic.php?t=4853

️ R-Studio 9.5.191603 Technician Portable by FC – (85 MB)
UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/hqfu6fcdrae6.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/a1ba42400cb1273ce513fef3b596cfff/R-Studio.9.5.191603.Technician.rar

R-Studio is a family of powerful and cost-effective undelete and data recovery software for experienced data recovery professionals. Empowered by the new unique data recovery technologies, R-STUDIO is the most comprehensive data recovery solution for recovery files from NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2/Ext3/Ext4 FS (Linux) partitions.

R-Studio also uses raw file recovery (scan for known file types) for heavily damaged or unknown file systems. It functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.
R-Studio functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.
The R-Studio data recovery software was originally developed for use by data recovery experts, system administrators, IT professionals, and advanced and experienced computer users. Some of R-Studio’s features were even designed exclusively for computer forensic experts, and most R-Studio users don’t need every single feature of the software.

In addition to being a full-featured data recovery utility, R-Studio also includes
An advanced RAID reconstruction module
A feature-rich text/hexadecimal editor
An entire advanced disk copying/imaging module in one single piece of software, which makes R-Studio your ideal complete solution for creating a data recovery workstation.

R-Studio utilities recover files
Deleted without Recycle Bin, or when Recycle Bin has been emptied;
Removed by virus attack or power failure;
After the partition with the files was reformatted, even for different file system;
When the partition structure on a hard disk was changed or damaged. In this case, R-Studio utilities can scan the hard disk trying to find previously existed partitions and recover files from found partitions.
From hard disk with bad sectors. R-Studio Data Recovery Software can first copy the entire disk or its part into an image file and then process such image file. This is especially useful when new bad sectors are constantly appearing on the hard disk, and remaining information must be immediately saved.

Code:Copy to clipboard

https://forum.r-tt.com/viewtopic.php?t=4853

️ R-Studio 9.5.191578 Technician FC Portable (224.75 MB) (224.75 MB)
UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/z3zr17vesfdu.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/191de0ae5124a6056a9a3abaa2d36b0a/R-Studio.9.5.191578.Technician.rar

R-Studio 4.0 Build 124053 | 5.32 MB
R-Studio is a family of powerful and cost-effective undelete and data recovery software. Empowered by the new unique data recovery technologies, it is the most comprehensive data recovery solution for recovery files from FAT12/16/32, NTFS, NTFS5 (created or updated by Windows 2000/XP/2003/Vista), HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2FS/Ext3FS (Linux) partitions. It functions on local and network disks, even if such partitions are formatted, damaged or deleted. Flexible parameter settings give you absolute control over data recovery.

R-Studio utilities recover files:

• Deleted without Recycle Bin, or when Recycle Bin has been emptied;
• Removed by virus attack or power failure;
• After the partition with the files was reformatted, even for different file system;
• When the partition structure on a hard disk was changed or damaged. In this case, R-Studio utilities can scan the hard disk trying to find previously existed partitions and recover files from found partitions.
• From hard disk with bad sectors. R-Studio Data Recovery Software can first copy the entire disk or its part into an image file and then process such image file. This is especially useful when new bad sectors are constantly appearing on the hard disk, and remaining information must be immediately saved.

R-Studio Data Recovery Features :

• Standard "Windows Explorer" – style interface.
• Host OS: Windows 9x, ME, NT, 2000, XP, 2003 Server, Vista.
• Data recovery over the Network. Files can be recovered on network computers running Win95/98/ME/NT/2000/XP/2003/Vista, Macintosh, Linux and UNIX.
• Supported file systems: FAT12, FAT16, FAT32,NTFS, NTFS5 (created or updated by Win2000/XP/2003/Vista), HFS/HFS+ (Macintosh), Little and Big Endian variants of UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) and Ext2FS/Ext3FS (Linux).
• Recognition and parsing Dynamic (Windows 2000/XP/2003/Vista), Basic(MBR) and BSD (UNIX) partitions layout schema and Apple partition map. Dynamic partitions over GPT are supported as well as dynamic partitions over MBR.
• Damaged RAID recovery. If OS cannot recognize your RAID, you can create a virtual RAID from its components. Such virtual RAID can be processed like a real one.
• Creates IMAGE FILES for an entire Hard Disk, Partition or its part. Such image files can be compressed and split into several files to put it on CD/DVD/Flash or FAT16/FAT32. Then the image files can be processed like regular disks.

Data recovery on damaged or deleted partitions, encrypted files (NTFS 5), alternative data streams (NTFS, NTFS 5).
– Recovering data if:

• FDISK or other disk utilities have been run;
• VIRUS has invaded; FAT is damaged; MBR is destroyed.

• Recognizes localized names.
• Recovered files can be saved on any (including network) disks accessible by the host operating system.
• File or disk content can be viewed and edited with the advanced hexadecimal editor. The editor supports NTFS file attribute editing.

New R-Studio features in version 4.0:
# HFS and HFS+ file systems support. In addition to FAT/NTFS/ExtFS2/ExtFS3/UFS1/UFS2 R-Studio supports HFS and HFS+ file systems developed by Apple Computer for use on computers running Mac OS.
* R-Studio can not be installed under Mac OS, but a hard drive with HFS and/or HFS+ partitions can be attached to Windows machine and processed by R-Studio.
# Apple Computers support. New R-Studio Emergency version can be run from CD on Intel-based Macintosh computers.
# Big Endian variant of UFS support.
# GPT partition layout schema support. This schema is used in 64-bit Windows OS.
# APM support. Apple Partition Map (APM) is a partition scheme used to define the low-level organization of data on disks formatted for use with Macintosh computers.
# R-Studio Technician Portable was added to R-Studio Technician package. The portable version can be run from a USB storage device.
# Compressed image format support. When R-Studio creates an image of the disk or its part, the image can be compressed and split into several files to put it on CD/DVD/Flash Drive or FAT16/FAT32.
* R-Studio reads and opens the created image only for the purpose of data recovery. For disk imaging and restoration tasks please consider R-Drive Image software.

Homepage – Code:Copy to clipboard

http://www.r-studio.com/

Code:Copy to clipboard

http://cutt.red/iemieJiw6eeJ?search=R-Studio%204.0%20Build%20124053

️ R-Studio 9.5.191520 Technician FC Portable (93.46 MB)

UsersDrive Link(s)
Code:Copy to clipboard

https://usersdrive.com/m12j9v3uqhh6.html

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/609ea6f575f53eabb74012017c9551a1/R-Studio.9.5.191520.Technician.rar

R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc.

R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive’s free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.

Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.

R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.

R-Drive Image features:
A simple wizard interface – no in-depth computer management skills are required.
On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
Image files compression. Image files can be compressed to save free storage space.
Removable media support. Image files can be stored on removable media.
Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn’t supported.
USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended. VIEW THE LIST
An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
Image files splitting. Drive images can be split into several files to fit a storage medium.
Image Protection. Disk image files can be password-protected and contain comments.
New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
Disk to Disk copy. An entire disk can be directly copied on another one.
Image files verification. You may check if your image files are good before you store them or restore data from them.
Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.

R-Drive Image Technician license allows the Licensee (home user or organization) to serve as many computers as required, provided that the software is not installed or run simultaneously on more computers than there are purchased licenses. With one technician license, you may serve any number of workstations or servers within your home network or organization, but you may not duplicate the software and use more than one copy of the software. The software can be temporally installed and/or run on a served computer but should be removed if you need to serve another computer. If you have several technicians and would like to serve more than one computer at the same time, you should consider purchasing multiple licenses.
The local version supports saving the created images (backup files) to network drives as well as restoring the saved images from the network drives, but the software must be installed or run on the served computer. R-Drive Image Technician (local version) does not give you the capability of serving a remote computer.

OS : Windows 2000/XP/ 2003/Vista/2008/Windows 7/Windows 8 / Windows Server 2012 (including 64 bits editions)
Language: Multilingual

Home Page – Code:Copy to clipboard

http://www.r-wipe.com/

️ R-Drive Image Technician 7.3 Build 7310 RePack (& Portable) by KpoJIuK – (113 MB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/e72292dbe2748197fe2b821410768dd0/R-Drive.Image.Technician.7.3.Build.7310.RePack..Portable.by.KpoJIuK.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/g5rcvt1yq9mh

R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc.

R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive’s free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.

Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.

R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.

R-Drive Image features:
A simple wizard interface – no in-depth computer management skills are required.
On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
Image files compression. Image files can be compressed to save free storage space.
Removable media support. Image files can be stored on removable media.
Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn’t supported.
USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended. VIEW THE LIST
An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
Image files splitting. Drive images can be split into several files to fit a storage medium.
Image Protection. Disk image files can be password-protected and contain comments.
New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
Disk to Disk copy. An entire disk can be directly copied on another one.
Image files verification. You may check if your image files are good before you store them or restore data from them.
Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.

R-Drive Image Technician license allows the Licensee (home user or organization) to serve as many computers as required, provided that the software is not installed or run simultaneously on more computers than there are purchased licenses. With one technician license, you may serve any number of workstations or servers within your home network or organization, but you may not duplicate the software and use more than one copy of the software. The software can be temporally installed and/or run on a served computer but should be removed if you need to serve another computer. If you have several technicians and would like to serve more than one computer at the same time, you should consider purchasing multiple licenses.
The local version supports saving the created images (backup files) to network drives as well as restoring the saved images from the network drives, but the software must be installed or run on the served computer. R-Drive Image Technician (local version) does not give you the capability of serving a remote computer.

OS : Windows 2000/XP/ 2003/Vista/2008/Windows 7/Windows 8 / Windows Server 2012 (including 64 bits editions)
Language: Multilingual

Home Page – Code:Copy to clipboard

http://www.r-wipe.com/

️ R-Drive Image Technician 7.3 Build 7309 RePack (& Portable) by KpoJIuK (113 MB) [113.63 MB]
ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/j57c47g7w3hv

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/00851188e2d398c6c52d9194b770166c/R-Drive.Image.Technician.7.3.Build.7309.RePack..Portable.by.KpoJIuK.rar

R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc.

R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive’s free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.

Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.

R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.

R-Drive Image features:
A simple wizard interface – no in-depth computer management skills are required.
On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
Image files compression. Image files can be compressed to save free storage space.
Removable media support. Image files can be stored on removable media.
Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn’t supported.
USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended. VIEW THE LIST
An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
Image files splitting. Drive images can be split into several files to fit a storage medium.
Image Protection. Disk image files can be password-protected and contain comments.
New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
Disk to Disk copy. An entire disk can be directly copied on another one.
Image files verification. You may check if your image files are good before you store them or restore data from them.
Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.

R-Drive Image Technician license allows the Licensee (home user or organization) to serve as many computers as required, provided that the software is not installed or run simultaneously on more computers than there are purchased licenses. With one technician license, you may serve any number of workstations or servers within your home network or organization, but you may not duplicate the software and use more than one copy of the software. The software can be temporally installed and/or run on a served computer but should be removed if you need to serve another computer. If you have several technicians and would like to serve more than one computer at the same time, you should consider purchasing multiple licenses.
The local version supports saving the created images (backup files) to network drives as well as restoring the saved images from the network drives, but the software must be installed or run on the served computer. R-Drive Image Technician (local version) does not give you the capability of serving a remote computer.

OS : Windows 2000/XP/ 2003/Vista/2008/Windows 7/Windows 8 / Windows Server 2012 (including 64 bits editions)
Language: Multilingual

Home Page – Code:Copy to clipboard

http://www.r-wipe.com/

️ R-Drive Image Technician 7.3 Build 7308 RePack (& Portable) by KpoJIuK (113 MB) [113.62 MB]
ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/lxkw3211fpkh

RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/7b2fddd8330e975230b5f36d565000f4/R-Drive.Image.Technician.7.3.Build.7308.RePack..Portable.by.KpoJIuK.rar