NulledCodeSolutions.online

Automatic Email Processor is the complete solution for Outlook to store and print incoming emails and their attachments automatically. For this, various filters, flexible configuration options, such as individually definable storage folders and the possibility of subsequent processing are available. For example, the path of the location where you want Automatic Email Processor to save certain emails or email attachments, can be assembled dynamically from individual properties of an email.

For storing email messages, inter alia, the output format can be specified (for example, PDF, RTF, or HTML). The Outlook message format (MSG files) is for example particularly suitable to back up e-mails. The program supports the creation of an unlimited number of rules to allow separate settings for different email accounts. Rules can be additionally applied to emails of a specific time period or to any previously received emails of an Outlook folder.

WITH AUTOMATIC EMAIL PROCESSOR, YOU CAN
Automatically store respectively archive email attachments
Save emails automatically (as PDF file or in the original format)
Automatically print emails and email attachments (PDF files, Office documents etc.)
Monitor an unlimited number of Outlook folders
Create custom rules for different tasks
Filter by subject, sender, recipient, attachment file name …
Receive information about the processing status via email
Create storage folders dynamically from properties of an email
Perform subsequent actions such as start a program with parameters, mark the message as read, or move the email into another Outlook folder
Re-process all emails (with certain criteria) of an Outlook email folder
Archive emails from any Outlook folder and period (e.g. as MSG files)

Code:Copy to clipboard

https://gillmeister-software.com/products/automatic-email-processor/changelog.aspx

️ Automatic Email Processor 3.8.15 – (40 MB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/4873aaf0fcde0ff3431c97cc3c4bee03/Automatic.Email.Processor.3.8.15.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/srxoh82tohah

Description
AutoFormplus R10 – The Next Level of Process Simulation. AutoForm Engineering GmbH, the leading supplier of software solutions for the sheet metal forming industry, has unveiled its latest software version AutoFormplus R10. This release brings tangible benefits and enables users to reach the next level of process simulation.

AutoFormplus R10 enables users to reach the next level of process simulation through a new set of powerful enhancements and functionalities. As a result, users benefit from higher flexibility and efficiency in process set-up and final validation for all forming processes in general and in particular for progressive dies and hot forming.
Cooling channels – tool design, tool temperature and sheet temperature.
Blank plan and bend plan: AutoFormplus R10 new functionalities enable users to efficiently plan and simulate (e.g. springback) progressive dies.
Blank plan and bend plan: AutoFormplus R10 new functionalities enable users to efficiently plan and simulate (e.g. springback) progressive dies.
AutoFormplus R10 brings advances in process modeling for hot forming as this release allows users to take cooling channels into account. Cooling channels can now be easily modeled with 3D curves and their corresponding diameters. Different cooling channel layouts lead to different temperature distributions on the tool surfaces. Hot spots on the tool surface can be easily detected and controlled depending on the selected layout of the cooling channels.
One of the major highlights of AutoFormplus R10 is the improved planning and simulation of progressive dies. In particular, AutoFormplus R7 supports the following use cases: import of CAD-designed tool geometry for the final process validation, part import for the planning stage and part import for full process engineering, which includes die face generation and simulation. These use cases are supported by new functionalities which enable users to efficiently plan and simulate progressive dies.
In addition, AutoFormplus R10 enables users to benefit from AutoForm-Sigmaplus capabilities as all Sigma pre and post processing functionalities are now integrated within AutoForm-ProcessExplorerplus. AutoFormplus R7 software users can now take advantage of Sigma applications – Systematic Process Improvement and Process Robustness. As a result, users can ensure a highly efficient engineering process and robust part production while meeting desired.

System Requirements
OS:Windows 10 (Pro, Enterprise)/Windows Server 2016/Windows 10 (Pro, Enterprise)
CPU:Supported on x86-64 microprocessor architecture only.
CATIA Support:CATIA V5-6R2012, V5-6R2013, V5-6R2014, V5-6R2015, V5-6R2016, V5-6R2017, V5-6R2018, V5-6R2019, V5-6R2020, V5-6R2021, V5-6R2022

Code:Copy to clipboard

https://www.autoform.com/en/newsroom/news/

️ AutoForm Plus R13.13.0.1 (x64) – (1000 MB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/f45344fab21a4c79dcee8102ed3ef58d/AutoForm.Plus.R13.13.0.1.X64.rar

Freedl.ink Link(s)
Code:Copy to clipboard

https://frdl.io/2q7bdyrribz7/AutoForm.Plus.R13.13.0.1.X64.rar

Description
AutoFormplus R10 – The Next Level of Process Simulation. AutoForm Engineering GmbH, the leading supplier of software solutions for the sheet metal forming industry, has unveiled its latest software version AutoFormplus R10. This release brings tangible benefits and enables users to reach the next level of process simulation.

AutoFormplus R10 enables users to reach the next level of process simulation through a new set of powerful enhancements and functionalities. As a result, users benefit from higher flexibility and efficiency in process set-up and final validation for all forming processes in general and in particular for progressive dies and hot forming.
Cooling channels – tool design, tool temperature and sheet temperature.
Blank plan and bend plan: AutoFormplus R10 new functionalities enable users to efficiently plan and simulate (e.g. springback) progressive dies.
Blank plan and bend plan: AutoFormplus R10 new functionalities enable users to efficiently plan and simulate (e.g. springback) progressive dies.
AutoFormplus R10 brings advances in process modeling for hot forming as this release allows users to take cooling channels into account. Cooling channels can now be easily modeled with 3D curves and their corresponding diameters. Different cooling channel layouts lead to different temperature distributions on the tool surfaces. Hot spots on the tool surface can be easily detected and controlled depending on the selected layout of the cooling channels.
One of the major highlights of AutoFormplus R10 is the improved planning and simulation of progressive dies. In particular, AutoFormplus R7 supports the following use cases: import of CAD-designed tool geometry for the final process validation, part import for the planning stage and part import for full process engineering, which includes die face generation and simulation. These use cases are supported by new functionalities which enable users to efficiently plan and simulate progressive dies.
In addition, AutoFormplus R10 enables users to benefit from AutoForm-Sigmaplus capabilities as all Sigma pre and post processing functionalities are now integrated within AutoForm-ProcessExplorerplus. AutoFormplus R7 software users can now take advantage of Sigma applications – Systematic Process Improvement and Process Robustness. As a result, users can ensure a highly efficient engineering process and robust part production while meeting desired.

System Requirements
OS:Windows 10 (Pro, Enterprise)/Windows Server 2016/Windows 10 (Pro, Enterprise)
CPU:Supported on x86-64 microprocessor architecture only.
CATIA Support:CATIA V5-6R2012, V5-6R2013, V5-6R2014, V5-6R2015, V5-6R2016, V5-6R2017, V5-6R2018, V5-6R2019, V5-6R2020, V5-6R2021, V5-6R2022

Code:Copy to clipboard

https://www.autoform.com/en/newsroom/news/

️ AutoForm Plus R13.13.0.1 (x64) – (998 MB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/884f6daa350ce563424eeb6c4928ab08/AutoForm.Plus.R13.13.0.1.X64.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/dxpms31pcoer

Autodesk Inc. has announced the release of Maya 2018.6. Bring your imagination to life with Autodesk Maya 3D animation, modeling, simulation, and rendering software. Maya helps artists tell their story with one fast, creative toolset.

Autodesk Maya 2018.6 Update Release Notes:

What’s Fixed

Animation
MAYA-95241 Deformed object doesn’t update after visibility change
MAYA-96800 Graph Editor hangs when animating cameras
MAYA-95665 deltaMush deformer doesn’t respect membership editing
MAYA-97424 Interactive Bind Skin Tool: Unable to shrink, move, or rotate the capsule
MAYA-96550 Using weightBlended skinning zeros all normals on mesh
MAYA-96384 Crash when selecting IK Control
MAYA-95190 TDNwrap crashes on file open when it has 0 influence
MAYA-94293 Limb length scaling fails
MAYA-97066 Crash while playback or scrub when in Parallel Evaluation mode
MAYA-97117 Parallel Evaluation : Maya crashes when rendering frame 1 but not frame 20
MAYA-96645 Graph Editor: Executing getViewportBounds in Stacked/Normalized view mode results in an error
MAYA-97134 A "long long int" attribute doesn’t properly keyframe
MAYA-96044 Crashes when deleting nodes from simple rig
Foundation
MAYA-96082 Maya 2018.5 builds incorrect libicu* symlinks on Linux
MAYA-96110 Crash when navigating in File browser
MAYA-96994 Creating node from PyMel fails after first instance
MAYA-97228 Memory corruption & crash when the garbage collector invoked from a thread cleans up widgets
MAYA-95977 File > Open "Selective Preload" broken with Alembic
MAYA-97511 Crash handler doesn’t report CER info for access violation crashes on Windows
Modeling
MAYA-96570 When replicating children of LOD_Group with inputConnections set to True, grandchild nodes are not duplicated
MAYA-97473 Long pause when selecting a large number of small meshes with the UV editor open
MAYA-97111 Shape Editor > Rebuild Target on mesh under custom transform crashes Maya
MAYA-97426 polyPlatonic, PolyDisc, polySuperShape, and PolyGear only available in UI
MAYA-97232 Select > Inverse for NURBS CVs broken
MAYA-96986 Maya crashes opening a scene where polyPinUV history was previously deleted
Rendering
MAYA-96721 Crash when importing Maya file with legacy render layers enabled
MAYA-96916 File browser no longer showing preview for EXR and HDR files
Viewport
MAYA-96342 Selection of objects causes continuous memory leak
MAYA-95856 Skin-Delta Deformation incorrect behavior when referenced
MAYA-97019 Geometry corruption with UV Editor in Shaded mode
MAYA-95549 MPxDrawOverride : selection interface to add a list of dagpaths/components/hitpoints (worldSpace)
MAYA-96234 Some UVs are only visible in the editor when you zoom out
MAYA-97391 MHWRender::MIndexBuffer: Linux: wrong number reported by "ogs -gpu" when using custom buffers
MAYA-96711 MPxDrawOverride::userSelect : deleting a node while moving mouse on the object in component selection mode causes crash
MAYA-96375 UV Editor is slow when many other meshes are in the scene

About Autodesk Maya 2018. With new enhancements and an ongoing focus on stability, Autodesk Maya 2018 software helps artists work faster and more efficiently than ever. Over the past few releases, Maya has continued to push the boundaries when it comes to character creation with updates to modeling, animation, and new interactive grooming workflows. In addition to characters, the motion graphics workflow in Maya continues to mature with growing capabilities that now includes rigid-body dynamics. When it comes to rendering, the combination of Render Setup and Arnold provides artists with a powerful rendering solution that can tackle the toughest projects.

Get into a new Way of Learning Maya 2018 by Autodesk. Tutorial for beginners, getting started, basics.

About Autodesk. Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk Maya
Version: 2018.6 *
Supported Architectures: x64
Website Home Page : Code:Copy to clipboard

http://www.autodesk.com

Language: english, 日本語, 中文
System Requirements: PC / MacOsx
Size: 3.4 Gb

* This is a full product install. On Windows operating systems, this will update your existing version of Maya 2018 if you already have it installed. Otherwise, it will install Maya for you. On Mac you will need to uninstall your existing Maya 2018 software before installing this update.

️ Autodesk Maya 2026.3 Win64 NoNLM – (3.85 GB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/6520833c6e49ce57f062fe59868616d7/Autodesk.Maya.2026.3.Win64.NoNLM.part1.rar
https://rapidgator.net/file/c705cc98169c154487f77cde713b3090/Autodesk.Maya.2026.3.Win64.NoNLM.part2.rar

Freedl.ink Link(s)
Code:Copy to clipboard

https://frdl.io/y0lliersm8ue/Autodesk.Maya.2026.3.Win64.NoNLM.part1.rar
https://frdl.io/y7qm03cq1j4z/Autodesk.Maya.2026.3.Win64.NoNLM.part2.rar

Year of release: 2025
Program version: 2026.3 Build 26.3.0.3310
Platform: Windows x64
Interface language: En / Chinese / Japanese
Medicine: Present

System requirements:

64-bit version of Windows 10 (version 1809 or later) or Windows 11
64-bit multi-core Intel or AMD processor with support for the SSE 4.2 instruction set
8 GB of RAM (16 GB or more recommended)
A detailed list of recommended systems and video adapters is provided in the article " Code:Copy to clipboard

https://www.autodesk.com/support/technical/article/caas/tsarticles/ts/udHliGvFHZVjHgd2e8JUK.html

Certified Equipment "
7 GB of free disk space for installation
To access online content, the latest version of one of the following browsers: Apple Safari, Microsoft Edge, Google Chrome, Mozilla Firefox
Three-button mouse

Description :
Autodesk Maya is a cross-platform 3D graphics editor. The program offers extensive functionality for 3D animation, modeling, and visualization. Autodesk Maya is used to create animation, environments, motion graphics, virtual reality, and characters. It is widely used in the film, television, and gaming industries.

Autodesk Maya is equipped with a wide range of tools for high-quality and convenient 3D work. The program offers everything a demanding modeler needs, allowing you to develop your own workflow. It features a well-designed visualization feature for finished models: four built-in visualizers are available, and various plugins, including V-Ray, can be installed.
New opportunities
– New in modeling
New modeling updates in Maya include updates to the Boolean node and a new dialog for setting units for STL files.

– Share slices in Animate in Context
Animate in Context allows frame artists to view frames surrounding their active scene directly in Maya.

– New in Rigging and Character Animation
Various customer requested updates and improvements to rigs and animators.

– Meet Golaem
Golaem, a crowd modeling and character layout plugin for Maya, is now available as part of the Media & Entertainment collection. Golaem simplifies populating worlds with digital characters.

– Default surface shader: OpenPBR
OpenPBR is now the default surface shader in Maya.

– Arnold for Maya 5.5.0
Maya 2026 includes Arnold version 5.5.0.

– Bifrost 2.13.0.0
Bifrost 2.13.0.0 includes the ability to simulate fluids directly in graphics, as well as many other new features.

– New in USD for Maya
USD for Maya 0.31 now supports light linking.

– What’s new in LookdevX for Maya
LookdevX 1.7.0 for Maya introduces improved publishing workflows, relative path support, and a new generative texture API.

– Flow Retopology for Maya 1.3
Flow Retopology is now included in Maya 2026. Use Flow Retopology to work with complex geometry and offload job processing to the cloud.

– Substance 3.0.4
Substance for Maya has been updated to version 3.0.4.

– Flow Wedging Training Materials
A new video playlist for those who want to try Flow Wedging.
Close
List of changes made
What was changed by the author of the assembly:

• The assembly is based on the official distribution of Autodesk Maya 2026.3.
• The option to opt out of installing the Flow Retopology for Maya module has been added to the installation package.
• The option to opt out of installing the Maya USD Extension module has been added to the installation package.
• The option to opt out of installing the LookdevX module has been added to the installation package.
• The option to refuse installation of the CER Service module has been added to the installation package.
• The Autodesk Access module has been removed from the installation process. Manual installation remains possible.
• The Autodesk Access Service Host service will be disabled in the program installed from the assembly.
• The Autodesk Identity Manager module has been removed from the installation package.
• The Autodesk Genuine Service module has been removed from the installation package.
• The Autodesk Network License Manager module has been removed from the installation package.
• The automatic update mechanism for the Autodesk Licensing module has been disabled.
• Autodesk On-Demand Install Service utility has been updated to version 2.19.0.110.
• The installer has been updated to version 2.19.0.2.
• Everything needed to cure the program is located inside the image in the Crack folder.

Treatment procedure
Install Autodesk Maya 2026 ( Setup.exe file ).

Run the AdskNLM.exe file from the Crack folder and just wait for the "Cracking complete. Enjoy!" message to appear.

Launch the installed application. In the license type selection window, click Use a network license.

Enjoy the registered version of the product!

FAQ
Question: How do I set the program interface language?
Answer: It doesn’t work during installation. The program is installed as a fully multilingual program. However, this is possible after installation. To switch the interface language to Chinese or Japanese, Code:Copy to clipboard

https://help.autodesk.com/view/MAYAUL/2024/ENU/?guid=GUID-B33CD543-000B-45C7-A750-2FD771D61CF2

. As ridiculous as it may sound, you can change the language of the help materials in the program settings itself, without any major changes to the OS settings!

Question: What about Ru? Why is there no Ru interface?!
Answer: This program never had a Ru interface.

Question: What is the program’s medicine?
Answer: The medicine included in the build is based on a hacked network licensing mechanism (NLM) from the MAGNiTUDE hacking group. The build’s author wrapped it all in a convenient shell, allowing for one-click application, and added a few extra touches.

Question: What is the compatibility of the medicine used in the assembly with other Autodesk programs?
Answer: Regarding the 2026 product line, the solution is compatible with most popular Autodesk programs that had already been released at the time of this build’s release. As for compatibility with programs from earlier product lines, that is also the case. Installing this program will disable activation for products from the 2020-2025 product lines. However, this activator will reactivate them! However, if you activated 2020-2021 products with a keygen, the activation format will change to network activation. Activation of products from the 2019 product line and earlier will not be affected in any way.

Question: I need the Autodesk Access module to exchange data with Autodesk servers. How do I install it?
Answer: Run ..\x64\Access\AdAccess-installer.exe from the distribution. After installation is complete, restart your computer – everything will work. I especially want to emphasize that you should install it after using the solution, as it will forcefully disable Autodesk Access!

Question: The program won’t install. A message appears stating that it’s preparing for installation, but after a few seconds, it closes, and the installation stops. What’s wrong?
Answer: There’s a compatibility issue with different installer versions. Follow Code:Copy to clipboard

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Error-2-The-system-cannot-find-the-file-specified-when-starting-Autodesk-Access-Service-Host.html

the instructions on the Autodesk website. Don’t be fooled by the fact that they’re for a different issue-the method will work here too.

Question: The program won’t install. I get a 400x series error message. What should I do?
Answer: First, Code:Copy to clipboard

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-Use-the-Log-Collection-Tool.html

that intelligently collects the necessary logs, which are scattered across various folders in the operating system.

️ Autodesk Maya 2026.3 Multilingual RePack by m0nkrus
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/094561ff348fbaedf4ec5bad4bb4615e/Autodesk.Maya.2026.3.Multilingual.part1.rar
https://rapidgator.net/file/f0c2c6fb11c1752e2101a017ba3ae597/Autodesk.Maya.2026.3.Multilingual.part2.rar
https://rapidgator.net/file/09dcff3c0549d16017c4e174560df8e4/Autodesk.Maya.2026.3.Multilingual.part3.rar

Freedl.ink Link(s)
Code:Copy to clipboard

https://frdl.io/5wkcededmjje/Autodesk.Maya.2026.3.Multilingual.part1.rar
https://frdl.io/u94gvfnifyif/Autodesk.Maya.2026.3.Multilingual.part2.rar
https://frdl.io/x705eyx7hq1c/Autodesk.Maya.2026.3.Multilingual.part3.rar

Maya 3D animation software offers a comprehensive creative feature set for 3D computer animation, modeling, simulation, rendering, and compositing on a highly extensible production platform. Maya has next-generation display technology, accelerated modeling workflows, and tools for handling complex data.

Facilities and software features of Autodesk Maya
-Advanced design three-dimensional models
-simulate a variety of natural and environmental elements such as climate change, water and liquids, fire, plants and …
-having a variety of tools for modeling and data management
-the possibility of transferring the properties of one object to another object
-Design Clothes, hair and sex and different scenarios
-Coordination with other software modeling and animating
-Supports mathematical model NURBS (short for Non-uniform rational B-spline)
-ability to combine elements of two-dimensional and three-dimensional models
-Ability to use scripting programming language and MEL (stands for Maya embedded language) and ++ C and Python in the development of software

Code:Copy to clipboard

https://help.autodesk.com/view/MAYAUL/2026/ENU/?guid=GUID-E30563A9-74A3-4E4B-A955-CDDD25A562FD

️ Autodesk Maya 2026 3 (x64) Multilingual – (6.9 GB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/b32086cd6980b217932cf64e7ab455ae/Autodesk.Maya.2026.3.X64.Multilingual.part1.rar
https://rapidgator.net/file/6f93abd8f218adf588a34516e42f9308/Autodesk.Maya.2026.3.X64.Multilingual.part2.rar
https://rapidgator.net/file/3ec7ebc2634ba92e734aaba7431bcc96/Autodesk.Maya.2026.3.X64.Multilingual.part3.rar

Freedl.ink Link(s)
Code:Copy to clipboard

https://frdl.io/ng78sfdg3ugd/Autodesk.Maya.2026.3.X64.Multilingual.part1.rar
https://frdl.io/trql6xwe5erc/Autodesk.Maya.2026.3.X64.Multilingual.part2.rar
https://frdl.io/rc4tei2d11qe/Autodesk.Maya.2026.3.X64.Multilingual.part3.rar

Autodesk has released InfraWorks WS Pro 2026.2 is a comprehensive, easy-to-use and flexible system for the management of water supply models. The system provides a master database for storing network and control data and includes the routines necessary to import, create and edit that data.

The InfoWorks WS Pro 2026 release is all about making integrating with different tools easier than ever, increasing your modeling capabilities. Demand Watch is now fully integrated within InfoWorks WS Pro, eliminating the need for a separate installer, server, or interface. You’ll now be able to create demand forecasts automatically and directly apply them to IWLive baselines. All these configurations and results are stored within the InfoWorks WS Pro database, making version control a snap and simplifying data management. IWLive Pro is also now installed alongside InfoWorks WS Pro, simplifying the configuration and setup process without requiring a separate installation. InfoWorks WS Pro users can deploy and test IWLive models with demand forecasting using the Operator Client, which allows simulation of operational changes – such as pipe bursts and valve isolations – within IWLive Pro. This provides real-time insights into the impact on the network and affected customers, enhancing confidence in the models configured from InfoWorks WS Pro.

InfoWorks WS Pro 2026.2 Release notes
The fixes listed here are those that are viewed as likely to impact on users in an unexpected way, mainly changed simulation results, or differences in behaviour that might not be obvious.
Customer Points
The "Demand by Category" and "Customer Points" grids did not always show the correct customer points. This is fixed.
Result Variation
There was an issue in some less stable models where there could be discrepancies in results on repeated runs. This is fixed.
Cloud databases
Networks in cloud databases with more than 8000 commits could not be opened. This is fixed.
Ruby
Transactions in controls were not rolled back in Ruby scripts if the Ruby script crashed. This is fixed.
Runs in explorer tree
When right-clicking a run with no network, an error message was displayed. This is fixed.
Standalone databases
Standalone databases could not be updated without the Workgroup Data Server. This is fixed.
Selection List
The "Open As." option was sometimes incorrectly disabled on the context menu for a selection list in the explorer tree. This is fixed.
Missing Hydrant Curves with Cloud Managed Multi-run
There was an issue where hydrant curves were not always available for a cloud managed multi-run. This is fixed.
Copying to Cloud Databases
Sometimes, copying from a transportable to a cloud database would fail, especially if the transportable had been copied to the cloud before. This is fixed.
ODBC Live Data Adaptor
When using a database schema, the columns in the database table were not appearing in the dropdown in the live data feed table. This is fixed.
File Geodatabase
Updating from a File Geodatabase in the Open Data Import Centre did not always work properly. This is fixed.

InfoWorks WS Pro is designed to improve the performance and cost-effectiveness of water distribution networks, allowing water companies of all sizes to offer customers a better service. With the ability for multiple users to access, this platform helps engineers efficiently conduct master plans, design networks, accurately simulate operations, conveniently assess network resilience and more. When the model has been created, InfoWorks WS Pro allows you to simulate the behaviour of the network under a range of conditions. A variety of reporting tools are provided for analysing the results.

Autodesk InfoWorks WS Pro overview

Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.

Owner: Autodesk Inc.
Product Name: InfoWorks WS Pro
Version: 2026.2
Supported Architectures: x64
Website Home Page : Code:Copy to clipboard

http://www.autodesk.com

Languages Supported: english
System Requirements: Windows **
Size: 3.3 Gb

️ Autodesk InfoWorks WS Pro 2026 2 Ultimate x64 – (3.21 GB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/4fb7675eccf8b6ad1ea874bebf172af7/Autodesk.InfoWorks.WS.Pro.2026.2.Ultimate.x64.part1.rar
https://rapidgator.net/file/469ea088d3dbeb34df4aafa97072a6ad/Autodesk.InfoWorks.WS.Pro.2026.2.Ultimate.x64.part2.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/fk49gnfk6oah
https://clicknupload.click/feeleedk9ass

Description
InfoWorks ICM – advanced integrated catchment modeling software. Model complex hydraulic and hydrologic network elements quickly, accurately, and collaboratively. InfoWorks ICM helps you plan for capacity improvements, system expansions, and emergency scenarios.

Deliver Quality from a Single Platform
-ICM was purpose built to provide comprehensive solutions to real world water problems, all in a single software environment.
-Every facet of a project can be created or imported into ICM, with world leading simulation solvers in one place. Both ICM and SWMM-based hydraulic assessments allow for rich simulation of rivers, sewer systems, runoff calculations and overland flooding.

Save Time without Sacrificing the Project
-ICM offers an array of solutions to the myriad of problems which slow down and otherwise mar a successful project delivery.
-Increase collaboration and minimize project downtime from otherwise lengthy simulations.
-Shift the focus away from model building and data entry, and allocate time to the interpretation of results in order to make the clear and decisive engineering decisions.

Plan for the Future
-ICM offers users the unique ability to delve into complex infrastructure challenges and return with comprehensive understanding, and solutions.
-Explain the why of what is happening, provide defendable mitigation plans and deliver confidence that the com-munity will thrive – whatever gets thrown at it.

Enable the Full Team Potential
-ICM offers a Workgroup Database environment which enables concurrent database and project access for unlimited users, as well as version control, validation options and conflict resolution options.
-Directly control and mitigate risks, and deliver quality projects on time. Save costs related to delayed project deliverables, modelling errors, and missized infrastructure.
System Requirements
OS:Windows 8.1, 10, 64 bit/64-bit Windows Server 2012 or later
CPU:Intel Core i3, i5, i7, or Xeon Processors; SSE2 (or greater).2.2 GHz minimum or higher; hyper-threading (HHT) or multi-core recommended.
RAM:4 GB minimum, at least 8GB recommended. (1D Model Build)/8 GB minimum, at least 16GB recommended (1D Local Simulations)/16GB minimum or higher (2D Local Simulations)
Display:1440 x 900 recommended or higher at Normal size (96dpi).
GPU:For 2D Simulations:NVIDIA GeForce, Quadro, GRID, and TESLA GPU cards (Always use the very latest NVIDIA drivers)
Space:1D models 100GB disk space

Code:Copy to clipboard

https://help.innovyze.com/display/infoworksicm/What%27s++New

️ Autodesk Infoworks ICUM Ultimate V2026 2 – (3.31 GB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/8213d98105b82b1c90cf5fabb03f2ca5/AUTODESK.INFOWORKS.ICM.ULTIMATE.V2026.2.part1.rar
https://rapidgator.net/file/9ee4b687a3b4ffb7dac2d536a7d40459/AUTODESK.INFOWORKS.ICM.ULTIMATE.V2026.2.part2.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/767yajy1hegu
https://clicknupload.click/whhhp8lx1avn

Description
InfoDrainage for Civil 3D software is a tool designed to support the requirements of delivering BIM (Building Information Modeling) compliance with optimized drainage design workflows. Civil 3D pipe networks and surfaces can be created from InfoDrainage networks or vice-versa and kept up to date via Parts Mapping. With InfoDrainage providing the tools to design, optimize, analyze, and compare drainage designs, gaining approval can be easy. Including traditional drainage and green infrastructure elements as 3D objects, the design remains true to site, helping to better communicate and support sustainable design approaches. Drainage designs involve iterative changes, which can be a painful and time-consuming process. Round-tripping is supported from InfoDrainage to Civil 3D networks, which can help to reduce data errors during required model updates. Using InfoDrainage for Civil 3D, engineers can efficiently represent their designs, giving greater confidence in the validity and accuracy of design information.

Key Learnings
-Learn how to initiate an export of your Civil 3D pipe network data to InfoDrainage
-Learn how to create a pipe network and 3D surfaces from an InfoDrainage model
-Learn how to create smart objects for all the traditional and sustainable drainage elements
-Learn how to adopt drainage design iterations through round-trip exchanges of data, reducing the risk of errors

System Requirements
OS:Microsoft® Windows® 10
CPU:Intel® or AMD 1GHz x64 processor with 2GB RAM
Display:1,024 x 768 resolution or above SVGA display
GPU:OpenGL 4.6 compatible with 64MB RAM
Printers:All Windows© printers supported
Compability:CIVIL 3D 2025 Code:Copy to clipboard

https://help.autodesk.com/view/INFDS/ENU/?guid=GUID-063CBF46-2130-4D98-A9EC-72EED6ED4CB9

️ Autodesk InfoDrainage 2025 5.2 – (1.84 GB)
RapidGator Link(s)
Code:Copy to clipboard

https://rapidgator.net/file/2b17afd27ad474ae33233adfecfe7778/Autodesk.InfoDrainage.2025.5.2.rar

ClickNUpload Link(s)
Code:Copy to clipboard

https://clicknupload.click/6cu52yw40qci